CEWIM, LLC Processing Orders Placed at HomePhoneWiring.com

Materials and Tools for Your Telephone Wiring Project

 Materials Home

  DSL Splitters

      Jacks and Cable Ties
      Wallplate Jacks
      Surface Jacks
      Keystone Jacks
            and Faceplates
      Drywall Mounts
      Cable Ties

  Junction Devices
  Tools
  CAT5E Cable
  Rental Tools
  Printouts


  IMPORTANT
           INFORMATION

    Shipping Info
    About Your Address
    Shipping Notification/Tracking
    Return/Refund Policy
    Contact Info
    Minimum Order
    Special Orders
    International Customers
    Special Notices


--------------------------------------
Recommend viewing Materials Home before proceeding to checkout.
Dual Voice Jack Wall Plates - Single Voice Jack Wall Plates - Surface Mount Voice Jack
Keystone Voice Jacks - Keystone Data Jacks - Keystone Face Plates
Low Voltage Drywall Mount - Cable Ties
Background Information on Jack Standards
(If you don't understand what 6P6C and 8P8C mean, please take a minute to read this before ordering jacks.)
Wallplate with Dual 6P6C Screw Terminal Jacks
Wallplate with Dual 6P6C Jacks
WP-6P6C-2J
$3.05
Select Color:


Minimum Order is $15.
Please refer to
Minimum Order
before proceeding to check-out.


International Customers
please read this.
Wallplate with Dual 6P6C Jacks Wallplate with Dual 6P6C Jacks These wallplates with two 6P6C screw terminal jacks can be used to terminate cable for voice or DSL. 

Two-pair or four-pair cable can be terminated as described on the pages about wiring for a 2nd line, wiring for a 3rd line, and 2 line jacks to provide flexible access to multiple lines . 

If connecting a CAT5E cable from a splitter for DSL, you can a pair from the splitter voice terminal to one jack for voice and different pair from the splitter DSL/MODEM/ATU-R terminals to the second jack for DSL.

These pictures above show front and back of the wallplate.  Click on these pictures to see higher resolution versions.  Note that color coding of the wires on these jacks matches the older "telco" system, which is normal for screw terminal jacks. 

These wallplates are offered here in white or beige.

Style of actual jacks may vary slightly due to changes by the manufacturer.

Ship Wt = 0.2 lbs
Go to Top of Jacks Page - Go to Materials Home
Wallplate with One 6P6C Screw Terminal Jack
Wallplate with 6P6C Jack
WP-6P6C-1J
$2.25
Select Color:


Minimum Order is $15.
Please refer to
Minimum Order
before proceeding to check-out.
Wallplate with One 6P6C Jacks Wallplate with One 6P6C Jacks These wallplates with one 6P6C screw terminal jack can be used to terminate cable for voice or DSL.  Note that color coding of the wires on these jacks matches the older "telco" system, which is normal for screw terminal jacks. 

These wallplates are currently only offered here in white.

Style of actual jacks may vary slightly due to changes by the manufacturer.

International Customers please read this.
Ship Wt = 0.2 lbs
Go to Top of Jacks Page - Go to Materials Home
Surface Mount Voice Jack
Surface Mount 6P6C Jack
JK-625A2-6
$2.95
Select Color:


Minimum Order is $15.
Please refer to
Minimum Order
before proceeding to check-out.
Surface Mount 6P6C Jack These surface mount 6P6C screw terminal jacks can be used to terminate cable for voice or DSL.  The color coding of the wires on these jacks matches the older "telco" system, which is normal for screw terminal jacks.  These jacks have snap-on covers.  The jacks can be mounted on almost any surface either with screws (not included) or a double-sided adhesive pad (included). 

I generally recommend avoiding surface mounted jacks and exposed cable in favor of wall plates with the cable routed concealed in wall voids in order to achieve an installation protected from damage with better appearance.  However these are offered here because there are occasions when a surface mount jack is the only practical solution. 

These jacks are offered here in ash (very light grey - some would call this "putty" - this color is commonly used by telcos for surface mount jacks because it "blends in" so well), ivory (beige), and white.

Style of actual jacks may vary slightly due to changes by the manufacturer.

International Customers please read this.
Ship Wt = 0.2 lbs
Go to Top of Jacks Page - Go to Materials Home
6P6C Keystone Jack Modules
6P6C Jack Module
JK-MD-6P6C
$1.55
Select Color:


Minimum Order is $15.
Please refer to
Minimum Order
before proceeding to check-out.

International Customers
please read this.
6P6C Jack

6P6C Jack
These CAT3 keystone jack modules are used to terminate two-pair or four-pair cable for voice or DSL.  The modules have color code markings for both the older "telco" and newer "multi-pair" color code systems.  If terminating four-pair cable, there are punchdown slots provided (but not marked) for the fourth (white/brown) pair, but since there are only six pins in the jack obviously there are no connections inside the jack from these slots. 

These pictures show modules in various orientations.  Click on any of these pictures to see higher resolution versions. Style of actual jacks may vary slightly due to changes by the manufacturer.

These modules fit in the faceplates offered below or most standard keystone openings in faceplates, surface boxes, or patch panels. 

Wires are seated in the 110 type IDC connections on these jacks using a single-wire 110 punchdown tool.  You'll note in the above pictures that the physical layout of the white and ivory modules are different.  Either one is suitable for voice or DSL.

Sorry, white 6P6C Keystone jacks temporarily out of stock.
Plenty of ivory 6P6C Keystone jacks available!

6P6C Jack

6P6C Jack
Ship Wt = 0.1 lbs
Go to Top of Jacks Page - Go to Materials Home
8P8C CAT5E Keystone Jack Modules
8P8C CAT5E Jack Modules
JK-MD-8P8C
$2.25
Select Color:


Minimum Order is $15.
Please refer to
Minimum Order
before proceeding to check-out.

International Customers
please read this.
8P8C CAT5E Jack

8P8C CAT5E Jack
These CAT5E keystone jack modules are used to terminate two-pair or four-pair cable for data (Ethernet LAN), voice, or DSL.  The modules have color code markings for both 568A and 568B configurations. 

These pictures show a white module and a black module in various orientations.  Click on any of these pictures to see higher resolution versions. Style of actual jacks may vary slightly due to changes by the manufacturer.

These modules fit in the faceplates offered below or most standard keystone openings in faceplates, surface boxes, or patch panels. 

Wires are seated in the 110 type IDC connections on these jacks using a single-wire 110 punchdown tool. 

8P8C CAT5E Jack

8P8C CAT5E Jack
8P8C Colors These modules are offered with white, ivory, or black, fronts.  For DSL, recommend use of one of these modules in a color different from your voice jacks, to clearly indicate that the jack should not be used for a phone. 

Ship Wt = 0.1 lbs
Go to Top of Jacks Page - Go to Materials Home
Keystone Faceplates
Keystone Faceplate
FACEPL-KST
$1.15
Select Color-Ports:


Minimum Order is $15.
Please refer to
Minimum Order
before proceeding to check-out.
KeystoneFaceplate
These faceplates are used to mount keystone jack modules in a standard single gang electrical wall frame. They will accept the modules offered above or most standard keystone modules.  Different type modules can be inserted in multi-port faceplates to accommodate different services.  Different color modules can be used to indicate which jack is used for which service.

These pictures show typical one port and two port faceplates.  You can click on these two pictures to see higher resolution versions.
KeystoneFaceplate
Select color and port count from the available choices when adding items to the shopping cart. You can increase the quantity once an item is in the shopping cart and come back to this page to add different items.

KeystoneFaceplates
International Customers please read this.
Ship Wt = 0.1 lbs
Go to Top of Jacks Page - Go to Materials Home
Low Voltage Drywall Mount
MPLS Low Voltage
Drywall Mount
MPLS-DWMNT
$2.95


Sorry, this item is out of stock at this time.

Minimum Order is $15.
Please refer to
Minimum Order
before proceeding to check-out.

International Customers
please read this.
The Erico MPLS single gang low voltage drywall mount frame eliminates need for an electrical box when installing telephone and Ethernet wiring(low voltage Class 2).  The mount frame locking screws provide stable support for faceplates in drywall between 1/2" and 1-1/4" (double 5/8") thick.  Installation is simple and only requires a drywall saw and screwdriver.  The mount also makes "fishing" wire in empty wall voids easier because there is not an electrical box structure in the way. 

For low voltage Class 2 use only.
Do NOT use for high voltage (AC) power.


MPLS
Photo of installed MPLS
Click to view larger version.
MPLS
Click to view installation instructions.
MPLS-Video
Click to view Erico video
showing how easy it is to install an MPLS.
Ship Wt = 0.1 lbs
Go to Top of Jacks Page - Go to Materials Home
Cable Ties
Cable Ties
(Bag of 100)
T50R0C2100
$2.65


Sorry, this item is out of stock at this time.


Minimum Order is $15.
Please refer to
Minimum Order
before proceeding to check-out.

International Customers
please read this.
T50R0C2
T50R0C2 Standard 8" black cable ties used to bundle and secure cables.  These are "professional quality" HellermannTyton T50R0C2 ties engineered and manufactured for maximum performance.  Rated at 50 lbs. minimum tensile strength.  These are the same brand/model ties used by a lot of telcos.  They're a lot stronger than the low strength ties found in "dollar stores". 

T50R0C2
These ties are 8" long and will secure a bundle of cables up to 1-3/4" diameter. 

100 ties per bag.  You may click the picture for a large version of the image. 

Ship Wt = 0.4 lbs
Go to Top of Jacks Page - Go to Materials Home

IMPORTANT INFORMATION
Shipping InfoAbout Your AddressShipping Notification/Tracking
Return/Refund PolicyContact InfoMinimum OrderSpecial Orders
International Customers

-------------------------------------
Orders will be processed by CEWIM LLC, PO Box 282, Blanco, TX 78606. 
Questions about orders should be addressed to hpwsupport(remove-this)@(spam-stop)homephonewiring.com
Sorry, you'll need to edit the email address to remove "(remove-this)" and "(spam-stop)". 
The volume of email the spam bots generate to a web posted address without this measure is outrageous. 
-------------------------------------
Back to Phone-Man's Home Page

Copyright © 1996-2008 Keith A. Michal All Rights Reserved.
All trademarks and logos shown herein are the property of their respective proprietors.